9/9

大师腻子

Sep - Maestro-Putty
Pack - Maestro-Putty

Maestro Putty

N.C Duco Master is recommended for fast and efficient re-finishing. This product is recommended for all motor vehicles


    Key Features
  • Smooth Flow
  • Improve Covering
  • Fast Drying
  • Stain Resistant
  • No Added Lead Or Mercury
  • High Quality
    Packing Sizes

    Packed in International Standards Tin Canes with IML Saleevs- available in following sizes

  • Quarter (0.91 Ltrs)
  • Gallon (3.64 Ltrs)
  • Drummy (14.56 Ltrs)
Pack - Maestro-Putty
    General Properties
  • Thinning Agent : Master Thinner
  • Apply with Spray
  • Ideal-Coat : 2-3 Coats
  • Hard Dry : 4-6 hours
  • Duration : 5-10 min
    Coverage

    Estimated average Coverage: 100 square feet per Litter (single Coat)

  • Estimated Room Sizes
  • size (20X10) requires 2 Ltrs
  • size (20X15) requires 3 Ltrs
  • size (20X20) requires 4 Ltrs
    Common Surfaces

    Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off.Use Master primer Red oxide on metal surface and under coat or wooden surface and leave to dry.

    Surface Preparation

    Surface must be clean, dry and free from efflorescent salt.Scuff surface using abrasive paper and dust off.Use Master primer Red oxide on metal surface and under coat or wooden surface and leave to dry.

Disclaimer:

Paints and Other marks followed by ® are registered trademarks, and are dully protected under the Copyright and Trade Mark Laws of Pakistan. The data given above is correct at the time of publication, however it is the responsibility of those using this information to check that it is up-to-date prior to specifying or using any of these paint product. Further, any advice, recommendation, information, assistance or service provided by Master Paints (Pvt.) Ltd with reference to goods manufactured by it or their use and application is given in good faith and is believed by the company to be appropriate and reliable. All product can be expected to perform as indicated as long as applications and application procedures of the individual products are followed as recommended on the appropriate Product application guide.