9/9

外墙底漆

Sep - Exterior-Primer

Pack - Exterior-Primer

Exterior Primer

A high acrylic Water based primer suitable for plastered, masonry, pop limed or preprinted surfaces. It insures a better finish and durability of topcoat. It provides a better adhesion on the surface with excellent inter coat adhesion.


    Key Features
  • Anti Fungal
  • Extra Coverage
  • Environment Friendly
  • Long Lasting Filmle
  • Improved Flow and Levelling
    Packing Sizes

    Packed in International Standards Plastic Canes with IML Saleevs- available in following sizes

  • 4.0 Ltr
  • 16.0 Ltr

Pack - Exterior-Primer

    General Properties
  • Thinning Agent : Water
  • By Brush 60%, By Spray,Roller (30-40%)
  • Apply with Brush,Roller, Paint Gun
  • Ideal-Coats : 1-2 Coat
  • Drying : 2 hours
    Coverage

    Estimated average Coverage: 100 square feet per Litter (single Coat)

  • Estimated Front Elevation
  • size (20X18) requires 4 Ltrs
  • size (20X36) requires 8 Ltrs
    Common Surfaces

    Thoroughly clean surface Remove all defective or poorly adhering material by rubbing down using a suitable abrasive paper and dust off. Prime with Master wall sealer where needed.

    Surface Preparation

    Surface must be clean, dry and free from efflorescent salts

Disclaimer:

Paints and Other marks followed by ® are registered trademarks, and are dully protected under the Copyright and Trade Mark Laws of Pakistan. The data given above is correct at the time of publication, however it is the responsibility of those using this information to check that it is up-to-date prior to specifying or using any of these paint product. Further, any advice, recommendation, information, assistance or service provided by Master Paints (Pvt.) Ltd with reference to goods manufactured by it or their use and application is given in good faith and is believed by the company to be appropriate and reliable. All product can be expected to perform as indicated as long as applications and application procedures of the individual products are followed as recommended on the appropriate Product application guide.